Specifications
Professional manufacturing, warranty, replacement.
18.11"x 12.99"x 9.84" (46x33x25cm).
Charge Temp Range: 32°F~131°F(0℃~55℃)；Discharge Temp Range: -4°F~131°F(-20℃~55℃); Storage Temp Range: -4°F~131°F(-20℃~55℃)(1 Month), 32°F~95°F(0℃~35℃)(1 Year).
105.8 lbs (48 Kg). That's 60% lighter than a traditional lead-acid.
40V(0.3C) Cut-off Voltage, fully charged in around 5hrs to 100% capacity.
Up to 4000 cycles compared to 300~500 cycles in lead acid battery.
Ideal for rugged & harsh environments. Much better than lead acid lithium’s. -4°F min, +131°F max discharging temps (battery performs well down to -4°F). Avoid charging below 32°F.
1P16S.
160A max continuous dischatge, 315A max 30S pulse. 600A max 3S pulse.
50A continuous charge, 44.8V recommended, Please note: this battery should be charged using a LiFePO4 compatible charger.
Contains a circuit that handles cell balancing, low temp cutoff, short circuit protection for increased performance and longer life.
IP rate is IP67, Compared with other IP65 on the market, it is more waterproof.
The battery has its own screen, which makes it easier to understand the battery parameter information.
1*48V 105AH Lithium Battery, 1*Battery SOC Indicator, 2*Brackets & M8 Screws, 1*External Control Switch, 1*58.4V 22A Dedicated Charger, 1*Users Manual
Safety Precautions:
- The battery needs to be recharged within 12 hours after fully discharging.
- Do not expose cable outside.
- All battery terminals must be disconnected before maintenance. Do not use cleaning solvents to clean the battery.
- Do not paint any part of the battery, include any internal or external components.
- Any foreign object is prohibited to be inserted into any part of the battery.
- Any warranty claims are excluded for direct or indirect damage due to items above.
- lf the battery is stored for a prolonged time, it is requirement that they are charged every three months, and the soC should be noless than 30%.
- Before installation, be sure to make sure the battery is in the turned off mode.
- Wiring must be correct, do not mix connect the positive and negative cables, and ensure no short circuit with the external device. lt is prohibited to connect the battery with AC power directly.
- The embedded BMS in the battery is designed for 51.2V DC, please do not connect battery in series.
- lt is prohibited to connect the battery with different type of battery.
- Please ensure the electrical parameters of battery system are compatible to controller and motor.
- Keep the battery away from fire or water.